Author: Service2Client

How to Account for Bad Debt Expense

3 min read

How to Account for Bad Debt ExpenseBad debt expense is an important concept that businesses must account for when it comes to their financial reporting. Regardless of the timeframe a company accounts for, it helps companies determine what portion of their receivables are collectible and what portion are not – and therefore, a bad debt expense. Depending on the receivables’ amount, this bad debt expense can take the form of either the allowance method or the direct write-off method.

Direct Write-Off Method Explained

While a company can see its receivables increase quickly, collections of these receivables might not be possible in the future due to client defaults. The direct write-off method is recommended for accounts with nominal amounts in question. A company’s receivables account sees an immediate write-off with this method. This lowers a company’s revenue, reducing net income. When it comes to accounting for it properly, the journal entry for the direct write-off method is as follows:

 
Description Debit Credit
Bad Debt Expense $500  
Accounts Receivable – ABC Business   $500

Description: Uncollectible ABC Account

Therefore, the journal entry would debit $500 to the Bad Debt Expense and credit $500 to the Accounts Receivable for the ABC Account.

Allowance Method

When it comes to more substantive or material amounts, businesses are inclined to use the Allowance Method because it’s set up to interact well with contra asset accounts that offset accounts receivable. Reported on the balance sheet, a contra asset account has an opposite balance to accounts receivable, and the journal entry is as follows:

Assets

Cash: $500,000

Accounts receivable: $300,000

Less: Allowance for doubtful accounts: $25,000

Equipment: $200,000

Less Accumulated Depreciation: $5,000

Building: $100,000

Less Accumulated Depreciation: $15,000

Since there’s zero impact on income statement accounts, contra accounts are advantageous for companies to use since the revenues aren’t lowered from a direct loss that bad debt expenses can cause with other methods.

When it comes to the Allowance Method in action, the three components are as follows:

First Step: Assess the uncollectible receivables

This is done by either determining the percentage of sales or by the percentage of receivables.

Percentage of Sales Method

This is usually determined by taking a percentage of either net or total credit sales. It’s generally dictated by past trends (both internal and macro economy forecast). For example, 2 percent of $10,000,000 = $200,000.

Percentage of Receivables

This method works by looking at the aging schedule for receivables, including those that are due but not yet late. For example, the receivables that are not late but not yet paid can have a low percentage for the particular bucket. Each successive and later bucket of unpaid receivables would require a higher percentage estimated as uncollectible.

Second Step: Journal entries are notated by entering the bad debt expense as a debit and the allowance for doubtful accounts as a credit.

Third Step: After an account is considered permanently uncollectible, the last two entries are as follows:

Description Debit Credit
Bad Debt Expense $250  
Allowance for Doubtful Accounts   $250
Description Debit Credit
Allowance for Doubtful Accounts $250  
Accounts Receivable – ABC Business   $250

Conclusion: The Importance of Calculating Bad Debt Expense

When it comes to determining a company’s results, it is required in their financial statements. If a company does not include this information, their assets could be inflated, potentially leading to overstating their net income. Calculating bad debt expense also helps companies determine which customers have defaulted on past bills, while at the same time highlighting customers that pay on time.

When it comes to accounting for bad debt expense, businesses that are experts at the two methods can effectively navigate the needs of internal and external audiences.

How New Grads Can Master Their Finances

4 min read

How New Grads Can Master Their FinancesCollege graduation is a huge milestone. You’ve completed one chapter and are on the precipice of the next. While exciting, it can also be daunting – you have a whole new set of responsibilities in front of you. But take heart, we have some tips to help you navigate.

  1. Look back to look forward. Take some time to examine your money habits. Do you have a tendency to overspend? Reward yourself with dinners out or a little retail therapy after a stressful event? Neither of these things is good or bad. They’re just choices. However, if you intentionally monitor your behavior and make necessary changes, you’ll learn how to budget early in your life. This way, you’ll set yourself up for success in the future. The truth is, a little self-awareness can go a long way.
  2. Create a budget and stick to it. Don’t think of this as limiting. It’s simply a way to get a hold of your money and learn to live within your means. One smart way to begin is using the 50/30/20 rule: You allocate 50 percent of your earnings to your basic needs, 30 percent to your wants, and 20 percent to your savings. You can also set up short-term and long-term goals. Do you want to save for a vacation? New furniture? A new car? No matter what, start by listing ALL your expenses and then breaking them out into categories. See what you’re spending and make adjustments. To get started, here’s a free budgeting calculator.
  3. Start saving. Right now, you might be feeling immortal. You’re young and just beginning your life. But someday, you’ll be older and need resources to live. So instead of thinking of this as taking away from your fun, think of it as paying yourself first, your future self. Whether for a getaway, an emergency, or whatever, regularly set aside some cash. But there’s more. Take advantage of savings accounts that will help you save on taxes, such as an individual retirement account (IRA) or a 401(K). Many employers offer these and even match your contributions, so don’t miss out. You want your money to work hard for you.
  4. Pay back your student loans. It might be very tempting just to kick this to the curb. Warning: Don’t do it! Even if you have a six-month grace period. Find out what kind of loan you have: Federal or private? Subsidized or unsubsidized? If you can’t afford to pay large chunks, contact your lender and work out a plan. Another important thing is to find out whether you can deduct a portion of your student loan interest payments on your taxes. And finally, you can even investigate consolidating, refinancing, or whether you qualify for loan deferment. Just handle it. You’ll be so glad you did.
  5. Know your worth when job hunting. Do research and find out the salary range for your level in your chosen industry. You should also examine companies. What are the benefits? If the perks are exceptional, it might be worth taking a slightly lower-paying job, depending on your situation. If you can’t negotiate your salary, ask to see if they have other perks, like helping with student loans. Another exercise is to create budgets around net salaries to get a sense of what managing your money looks like.
  6. Vet your health insurance. Some of you might be covered on your parents’ policy until age 26. Or you might be covered by your employer. If you have insurance through your job and are in good health, a plan with a higher deductible may be a smart move. You’ll save on monthly payments and have more cash for after work.          

When it comes to handling your money, all it takes is a little practice. And baby steps. Sure, you’re going to make mistakes. But jump in. Learn the ins and outs. In the end, it’s going to determine whether you remain a student or become a responsible adult.

Sources

https://www.investopedia.com/top-7-finance-tips-for-new-grads-5248426 

 

Cash Flow Available for Debt Service (CFADS)

3 min read

Cash Flow Available for Debt Service (CFADS)When it comes to the risk of default, Moody’s found that during COVID-19, American businesses had a 7.8 percent chance of defaulting. This is compared to a low of 4 percent in 2021, but lower than the current 9.2 percent risk of default, according to a March 2025 report by the rating agency.

Also known as cash flow available for debt service, CFADS determines how much cash is available to service debt obligations. It looks at different cash inflows/outflows to show both internal (owners and managers) and external audiences (investors) how efficient (or not) a business is in its ability to produce cash flows and manage its debts without defaulting.

While one method businesses use is balancing client sales, it is also common to look at various accounting entries, including Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA). The results of CFADS are often used by financial analysts when creating coverage ratios, including the project life coverage ratio (PLCR), the debt service coverage ratio (DSCR), and the loan life coverage ratio (LLCR). It can sometimes take the place of EBITDA in certain circumstances. It’s important to note that the three coverage ratios show how well a plan is able to service and not default on debt throughout the entire project’s period.

For example, the DSCR = CFADS / Scheduled Debt Service (Interest + Principal Obligations)

Once this is calculated based on the company’s project specifications, if the result is greater than 1, then it signifies and gives greater confidence to internal and external audiences that the company will be able to meet its milestones and final payments.

The most efficient formula for calculating CFADS is as follows:

EBITDA – Taxes – Positive or Negative Result of Working Capital – Capital Expenditures for Maintenance Only

$200,000 (EBITDA) – $30,000 (Taxes) + $20,000 (assuming there’s a negative $20,000 change in working capital) – $40,000 (assuming the capital expenditure investing in maintenance)

CFADS = $150,000

Sometimes the calculation includes dividends, which need to be factored into the calculation. This example assumes it is not part of the calculation.

Interpreting Results

It’s important to understand that a more detailed analysis helps all audiences determine if the projected cash flow is available for different claimants of the business. While most of the calculations are done via the waterfall model, it’s important to analyze it based upon senior and junior debt, along with equity. If a company declares bankruptcy, senior debt holders are the first priority to be made whole (or as whole as possible, depending on the circumstances). Senior debt is collateralized or secured with company assets that are sold off during bankruptcy. From there, junior debt holders are next in line, followed by convertible note holders, then preferred stockholders, and finally common stockholders.

While this calculation is only one part of the way internal and external stakeholders can measure a company’s financial health, with the chance of more firms defaulting on debt, it’s another tool in a financial analyst’s toolbox.

Deepfake Detection in Voice and Video

5 min read

Deepfake Detection in Voice and VideoDeepfakes are becoming more convincing than ever. Whether manipulated media or entirely generated by artificial intelligence (AI), deepfakes can now realistically alter faces and clone voices. They can even fabricate entire scenarios across video, audio, and text. Unfortunately, these developments now create significant challenges, and people can no longer trust what is presented online. Methods that have in the past been used to detect less-perfect deepfakes are becoming obsolete. There is now an urgent need to develop more effective detection solutions.

The Escalating Threat

Deepfakes are being actively used in malicious ways. It is being used to fuel misinformation, enable new forms of fraud, and erode the foundations of digital trust. An Identity Fraud Report 2024 by Sumsub noted a four times increase in the number of deepfakes detected worldwide from 2023 to 2024. A research study by iProov tested 2,000 UK and US consumers, revealing that only 0.1 percent of the participants accurately distinguished between real and fake content. These are only a few statistics on the severity of the deepfake problem.

Limitations of Current Detection

There are various tools and technologies available for detecting deepfakes, ranging from manual forensic analysis to automated AI-based solutions. These methods rely on identifying issues such as inconsistencies in blinking patterns, facial warping, extra limbs, or audio glitches. However, new AI models creating deepfakes have advanced to minimize these problems.

Therefore, relying on known flaws to detect deepfakes is not a sustainable strategy in an ever-evolving landscape.

Innovations in Detection Modalities and Speed

Innovation in deepfake detection requires an approach that will address the complexity and diverse nature of modern synthetic media. The new innovations must move beyond analyzing just one type of media.

  • Multi-Modal Detection – The latest deepfakes are multi-modal and can manipulate video, audio, and even accompanying text simultaneously. Therefore, detection software must have the capability to analyze these elements together.
  • Focus on Voice and Audio – This is especially crucial in detecting sophisticated voice deepfakes used in scams. New software is being built to analyze subtle vocal characteristics, background noise inconsistencies, and even speech patterns in combination with any available video to verify authenticity.
  • Real-Time and Scalable Solutions – There is a need for advanced systems that can detect deepfakes quickly and efficiently in livestreams and large volumes of content. Detection system developers must develop algorithms and infrastructure capable of this speed and scale.

Advancements in AI for Deepfake Detection

AI is playing a major role in the development of next-generation detection software that is beyond simple artifact detection to more sophisticated analysis.

  • Leveraging Foundation Models – Researchers are exploring large, pre-trained AI models that are behind many generative tools. Since these models are trained with vast amounts of data, they understand natural media. They can be fine-tuned and incorporated into detection software to help spot deviations that indicate synthetic origin.
  • Proactive and Generative Approaches – Some innovations are proactive, where generative models are being used to understand how fakes are made. This will allow detectors built into software platforms to anticipate and identify novel manipulation techniques even before they become widespread.
  • Towards more Robust and Explainable AI – Software development is also focusing on robustness against adversarial attacks. New training methods are being implemented to make detection software more resilient to deliberate attempts at evasion. There is also a push for Explainable AI (XAI) within detection software. This will help users understand why a piece of media was flagged.

Authentication and Verification Beyond Pure Detection

Advanced detection is bound to be challenged; therefore, next-generation solutions are incorporating methods for authentication and verification built into software systems.

  • Blockchain and Media Provenance – Exploring how blockchain technology can be utilized to create immutable records of media origin and any subsequent changes.
  • Human Element and Crowd-Sourcing – Integrating human expertise as a judgment of human expertise will help in complex cases. Crowd-sourcing expertise is also being explored as a way for platforms to scale human review.
  • Detecting Deepfakes in New Frontiers – As digital interactions move into new spaces like virtual worlds and the metaverse, detection software for these platforms is also necessary. This will help identify manipulated avatars and synthetic content within the immersive environments.
  • International Collaboration and Standards — fighting deepfakes is a global challenge, as synthetic media can easily spread worldwide. Therefore, collaboration among international researchers, governments, and technology companies is crucial. To accelerate the development and deployment of effective countermeasures, the involved parties can share data on new deepfake techniques and detection methods, as well as common technical standards.
  • Public Awareness and Digital Literacy – educating the public on how deepfakes are created and what to look for empowers them not to be duped by fakes. Promoting digital literacy helps people evaluate online content more skeptically and understand the importance of verified sources.

Conclusion

The race between deepfake generation and detection will undoubtedly continue. The ongoing development and deployment of sophisticated detection software is an important step toward safeguarding the integrity of digital media and preserving trust in everyday digital interactions. To deal with the escalating deepfake threat, passive defense is insufficient. Therefore, it is recommended to prioritize adopting integrated, next-generation detection software and verification methods to safeguard operations and trust.

Valuation Ratio Calculating the EV / 2P

3 min read

Valuation Ratio Calculating the EV / 2PWhen it comes to analyzing a company’s financials, there are many avenues we can take. One way is through multiples; calculating the EV/2P multiple is the focus of this analysis.

This ratio looks at a business’ enterprise value against its proven and probable 2P reserves. While ratios or multiples are used in valuing companies, this metric is used chiefly to value gas and oil companies for energy sector analysts. Analysts use this calculation to determine the likelihood that a company’s reserve resources can underpin its functioning and expansion efforts. Along with the ratio, analysts use micro and macro factors to determine a company’s financial health, its growth prospects, and whether the business is undervalued or overvalued.

This multiple is similar in comparison to other valuation multiples such as Price-to-Book (P/B), Price-to-Earnings (PE), Enterprise Value/Earnings Before Interest, Taxes, Depreciation, and Amortization. While these other metrics can also value an oil or gas company, understanding how it’s calculated is essential to why it is sector specific.  

Breaking Down the EV/2P Ratio

EV = Market Value of Equity + Market Value of Debt – Cash and Cash Equivalents

It’s determined by the complete market worth asserted by the bond and equity holders (net of cash).

2P = Proven Reserves + Probable Reserves

The reserves of a company give analysts and investors an idea of the likelihood of the recoverability of reserves being produced and assisting the company’s growth. Proven reserves, often denoted as “P1” or “P90,” are rated at a 90 percent chance of recovering successfully. Probable reserves, also called “P50,” have a 1-in-2 chance of recovering. Both reserve types and their likelihood of being recovered are, therefore, referred to as 2P.  

It’s important to note a third category referred to as “possible reserves.” This category is not factored into the company’s valuation because the 10 percent to 50 percent likelihood of reserve recoverability is too low.  

Example

Illustrating how it’s calculated gives a more complete picture of how to analyze the results. For example, say a business‘ market capitalization is $200 million with a net debt of $100 million, giving it an enterprise value of $300 million. Assuming the company has $10 million of probable reserves, $20 million of proven reserves, and $15 million of possible reserves, the calculation is as follows:

EV = $300 million ($200 million + $100 million)

2P reserves = $30 million ($10 million + $20 million)

Therefore, $300 million/$30 million = $10

Every dollar of its market capitalization is worth $10 based on its 2P reserves. Once the calculation is determined, the ratio of the EV/2P is measured against the energy sector’s average ratio. The higher the EV/2P ratio, especially against its peers, the higher valuation the company has compared to other companies with the same amount of 2P reserves. The company’s shares are sold at a higher multiple than other companies.

It’s important to keep in mind that if a company’s financials are stronger or it’s more efficient and provides a better prospect for investors against its peers, its lofty valuation may be justified. It’s also important to not look at valuing companies exclusively with this ratio/multiple but also review other metrics and the macro-economic conditions before making a final investment decision.

While this multiple is primarily used for the energy industry, those who use it should be mindful to not analyze a company in that lens only, but to use a holistic analysis when valuing any type of company.

Treasury Declares New Beneficial Ownership Reporting Law Will Apply Only to Foreign Companies

3 min read

BOI Law Will Apply Only to Foreign CompaniesThe Trump Administration announced it will no longer apply the beneficial ownership information (BOI) requirements of the Corporate Transparency Act (CTA) to domestic companies. This declaration came first via social media, marking a significant shift in policy.

Under this new directive, U.S. businesses are exempt from the BOI reporting requirements of the CTA. The Treasury Department made the initial announcement on social media, followed by an official press release and a Truth Social post from President Donald Trump, who described the requirement as “outrageous and invasive.”

The bipartisan CTA was originally designed to combat illegal activities like drug trafficking and money laundering by limiting the use of anonymous shell companies. While the ownership information would have been available to law enforcement agencies, it would not have been publicly accessible.

In its March 3 website statement, the Treasury Department clarified that it will not enforce penalties or fines related to the BOI reporting rule under current regulatory deadlines established during the Biden Administration. Furthermore, it will not impose penalties against U.S. citizens, domestic reporting companies or their beneficial owners after new rule changes are implemented.

Treasury’s proposed rules will limit required reporting to foreign companies only, though the precise scope remains unclear – whether this applies exclusively to foreign companies registered in the United States or extends to U.S. companies with foreign ownership.

Previously, reporting requirements covered all businesses formed in the United States and foreign companies registered to operate in any U.S. state or tribal territory.

The Financial Crimes Enforcement Network (FinCEN), which oversees CTA enforcement, appears to have been surprised by this policy change. Days earlier, following court decisions that permitted BOI reporting requirements to proceed, FinCEN had announced plans to extend reporting deadlines to March 21. As of the most recent update, FinCEN’s website has not reflected the Treasury’s announcement, and requests for comment went unanswered.

What Happens Now?

This unexpected announcement has created uncertainty for businesses, particularly regarding already-submitted data.

The law required detailed information from “beneficial owners,” including names, birthdates, addresses, and identification documents. Similar information was required from company applicants – typically individuals who helped establish the company.

Millions of companies had already complied before this announcement, raising questions about the handling of submitted information. Inquiries to FinCEN about the fate of this data have not received responses.

The status of pending legal cases also remains uncertain. Cases continue through at least four federal appellate courts, and additional litigation may emerge to compel administration compliance with the law.

Crucially, the Corporate Transparency Act itself remains valid legislation. Despite the Treasury’s position, the executive branch cannot overturn the laws passed by Congress. It can, however, choose selective enforcement – similar to approaches seen with cannabis legislation. This creates potential complications, as future administrations could reinstate full enforcement.

Building Deeper Customer Connections: Leveraging Web3 for Loyalty, Community, and Engagement

4 min read

Web3 for Loyalty, Community, and EngagementCompetition in business today has become fierce. Each organization is constantly looking for innovative ways to form strong relationships with its customers. Loyalty programs have been used for a long time to build a devoted customer base. As technology advances, new technologies like Web3 are emerging, offering more opportunities to revolutionize loyalty programs, build vibrant communities, and deepen customer engagement.

Transforming loyalty programs through Web3

Loyalty programs help boost customer spending and drive long-term business success. Loyalty program members also generate more revenue than non-members. In the United States alone, the average consumer belonged to more than 15 programs in 2024. However, traditional loyalty programs have encountered problems that include customer disengagement and unclaimed rewards.

Web3-based loyalty programs address these problems by leveraging blockchain technology to create a more engaging, transparent, and valuable experience for customers. With the global Web3 market having a valuation of $4.62 billion by January 2025, there is enormous potential for businesses to innovate in this space. Web3 is the next iteration of the internet, which will help businesses create deeper customer connections through decentralized technologies like blockchain, non-fungible tokens (NFTs), and decentralized autonomous organizations (DAOs).

Why Web3 Loyalty Programs

  1. Enhanced personalization and security
    Web3 loyalty programs provide enhanced customer engagement through hyper-personalization. Businesses can utilize blockchain technology to analyze customer preferences, behaviors, and interactions to customize rewards. This makes every customer feel valued. Using this approach, it becomes easy to focus on those customers who drive the majority of engagement and revenue. The decentralized nature of blockchain also ensures that data remains encrypted, secure, and only accessible with explicit consent.
  2. True ownership of rewards
    In traditional programs, loyalty points exist only within a company’s database. However, Web3 platforms create unique tokens that a customer can own and control. When customers have this kind of authentic ownership, it changes how they perceive and engage with loyalty programs that allow greater flexibility in how they use their rewards.
  3. Interoperability and expanded value
    Traditional loyalty programs, in most cases, limit rewards to a single brand or ecosystem. On the other hand, Web3 loyalty tokens function as universal currencies. This enables global redemption networks — permissionless collaboration through smart contracts and cross-sector partnerships.
  4. NTF-based loyalty rewards
    Instead of receiving generic points, a customer is issued an NFT token. The uniqueness of NFTs adds a layer of desirability and collectability, making the loyalty program more engaging and valuable. The NFTs can be potentially traded or sold on secondary marketplaces, adding more value to customers who can turn their loyalty tokens into liquid assets.
  5. Community driven engagement
    Web3 loyalty programs offer a community-centered approach through shared goals, collective rewards, and member governance through DAOs. By encouraging peer interaction it creates a sense of belonging, shifting focus from individual transactions to collective engagement.
  6. Transparency and trust
    Blockchain infrastructure provides immutable transaction records and enhanced security. Real-time reward tracking is also possible through blockchain technology. This addresses consumer concerns about traditional programs’ security risks. It also builds trust and encourages more engagement.
  7. Reduced unused rewards
    Web3 programs can implement “tokenomics” to prevent the devaluation of rewards and encourage active participation.

Navigating the Web3 landscape

While there is immense potential to build deeper customer connections with Web3, there are some considerations to help businesses approach this landscape strategically.

  • Understand your customers
    Before adopting the Web3 loyalty programs, a business must understand its customers. It is important to find out if they are receptive to these technologies, as well as their digital habits and preferences.
  • Start small
    Beginning with a pilot project and gradually integrating Web3 elements allows for learning and proper adaptation.
  • Focus on value creation
    The key to success when adopting any new technology is providing genuine value to customers. The technology should enhance the customer experience.
  • Educate customers
    Educate customers about the new adoption and provide clear guidance on how to interact with the technology.
  • Stay informed
    The Web3 landscape is rapidly evolving; therefore, it is crucial to stay informed on the latest trends and best practices.

Conclusion

Web3 presents a unique opportunity for businesses to revolutionize loyalty programs through blockchain, NFTs, and decentralized engagement. The ability to prioritize personalization, security, and true ownership will help businesses develop deeper customer connections. Although Web3 might seem complex, the potential benefits for businesses that embrace this evolving technology are significant.

Understanding IRS Forms 1099 for Lawsuit Settlements

3 min read

Understanding IRS Forms 1099 for Lawsuit SettlementsThe Basics of Tax Reporting in Legal Settlements

When you collect a settlement for a lawsuit, you’ll likely also receive a Form 1099 from the IRS. This form serves as a reminder to pay taxes on your settlement; copies are sent to both you and the IRS. These forms match reported income for income tax purposes, making them critical for accurate tax filing.

In lawsuit contexts, two common forms 1099 are issued:

  • Form 1099-MISC: This version can include various types of settlement payments, often termed other income
  • Form 1099-NEC: Used specifically for non-employee compensation

Understanding the Difference Between Forms

The distinction between these forms is significant. A Form 1099-NEC informs the IRS that taxes for self-employment should be collected in addition to income taxes. This form is appropriate if you were a non-employee contractor suing for unpaid compensation.

However, in cases like wrongful termination or emotional distress claims, you’ll want the non-wage portion reported on Form 1099-MISC instead of Form 1099-NEC to avoid unnecessary self-employment taxes. Pay close attention because filing an incorrect form can be difficult to correct later.

Double Reporting: When 100% Becomes 200%

A surprising aspect of legal settlement tax reporting is that defendants often issue forms 1099 totaling 200% of the actual settlement amount.

  • The plaintiff receives a 1099 for 100% of the settlement
  • The plaintiff’s attorney receives a 1099 for 100% of the settlement

This duplicate reporting occurs because the IRS requires defendants to report the full settlement amount to both parties when payments are made jointly or through the attorney’s trust account. This is done because the defendant may not be aware of how the money is ultimately divided between client and attorney.

Legal Fees and Tax Treatment

The U.S. Supreme Court decided in the case Commissioner v. Banks that gross income for a plaintiff typically includes the part of the settlement paid to their attorney as legal fees. This means you might be taxed on money you never actually received.

To address this issue, plaintiffs should understand when they can deduct legal fees:

  • Plaintiffs in employment cases, civil rights cases, and most whistleblower cases qualify for deductions
  • Legal fees must typically be paid in the same year as the settlement (as in contingent fee arrangements)
  • Outside these case types, deducting legal fees becomes much more difficult
  • Even in personal physical injury cases, complications arise if punitive damages or interest are awarded

Tax Planning Before Settlement

It’s best to deal with tax reporting before finalizing your settlement agreement. Consider these strategies:

  1. Include specific provisions about which forms 1099 are to be issued
  2. Specify the recipients, amounts, and even which boxes should be completed on the forms
  3. For physical injury cases that should be tax-free, get written commitments about tax reporting
  4. Consider separate checks to lawyer and client when appropriate (though this may not fully prevent attribution of legal fees to plaintiffs)

Without express provisions in your settlement agreement regarding tax forms, correcting any errors later becomes extremely difficult.

Tax-Free Settlements

Some settlements can be totally free of taxation, such as cases where compensation is granted as damages for physical injury. In typical injury cases like auto accidents, damages should be tax-free, but only if there are no punitive damages and no interest as part of the settlement.

Even when you believe your settlement qualifies as tax-free, securing written confirmation about tax reporting in your settlement agreement provides important protection.

Conclusion

Understanding the tax implications of your lawsuit settlement before signing an agreement can save significant headaches and potentially reduce your tax burden. Consulting with a tax professional who specializes in legal settlements is advisable for complex cases.

Preventing a Government Shut Down, Rolling Back Regulations and Clarifying Cryptocurrency Protocols

3 min read

Preventing a Government Shut Down, Rolling Back Regulations and Clarifying Cryptocurrency ProtocolsFull-Year Continuing Appropriations and Extensions Act, 2025 (HR 1968) – In the nick of time before the midnight deadline that would have otherwise shut down the Federal government, Congress passed a budget bill to fund the rest of the fiscal year that ends Sept. 30. This bill increases funding for the military by $6 billion while reducing non-defense spending by $13 million. The federal funding bill also reduced the amount of funding for the District of Columbia (Washington D.C.) by $1.1 billion, which is paid for by local taxes. This final continuing resolution bill was passed in the House on March 11, in the Senate on March 14, and signed by the president on March 15.

District of Columbia Local Funds Act, 2025 (S 1077) – Just four hours after passing the CR budget bill, Senators passed this new bill to restore Washington funding back to 2024 levels. The reduction of more than $1 billion in funding threatens to impact police, fire, and other services in the city where much of Congress resides. The bill was introduced by Susan Collins (R-ME) and passed on March 14. It is currently under consideration in the House.

Bureau of Ocean Energy Management rule relating to “Protection of Marine Archaeological Resources” (SJ Res 11) – This resolution rolls back a rule imposed during the last administration by the Bureau of Ocean Energy Management. The revoked rule previously required oil and gas companies to identify and submit a report of potential archaeological resources on the Outer Continental Shelf seafloor that could be affected by development. The joint resolution was introduced by Sen. John Kennedy on Feb. 4. It passed in the Senate on Feb. 26 and in the House on March 6. The bill was signed by the president on March 14.

Protect Small Businesses from Excessive Paperwork Act of 2025 (HR 736) – Introduced by Rep. Zach Nunn (R-IA) on Jan. 24, this legislation passed in the House on Feb. 10 and is currently under consideration in the Senate. The purpose of the bill is to extend the filing deadline to the end of the year for businesses to report beneficial ownership information (BOI). This would give the Department of Treasury time to reconsider rules implemented during the Biden administration in order to make sure small businesses are not burdened by excessive and complex regulations. 

GENIUS Act of 2025 (S 919) – This bipartisan bill was introduced by Sen. Bill Hagerty (R-TN) on March 10. It would establish licensing and regulatory requirements for stablecoins, which are cryptocurrency tokens used in the crypto economy and traditional financial markets. Among its provisions, the bill would enable states to regulate stablecoin issuers with a market capitalization of under $10 billion, while larger issuers would be regulated at the federal level. This bipartisan legislation is currently in the early stages of committee reporting.

 

Dissecting the Half-Year Convention for Depreciation

3 min read

Half-Year Convention for DepreciationDepreciation can help a business realize tax benefits, maintain compliance with financial reporting requirements, and project asset replacement. The half-year convention for depreciation is an important practice to understand.

For fixed assets, depreciation is recognized and recorded on a 50 percent basis for the initial and concluding years over its schedule. This supposes that fixed assets have been in service for 50 percent of their initial calendar service year upon acquisition. It’s normally implemented by taxation agencies to limit the upper limits for depreciation attestations to 50 percent of the yearly figures.

The balance of the annual 50 percent depreciation amount is recognized/recorded during the depreciation schedule’s last year, as the fixed asset will be removed from service mid-year. Regardless of the type of depreciation – straight-line, double-declining, etc. – the half-year convention applies equally.

This has been instituted because businesses were tempted to buy fixed assets in the third or fourth quarter of a fiscal year and try to deduct it fully via complete depreciation deduction. However, this convention is explicit in that fixed assets in service on or after July 1 may only deduct half of otherwise normal depreciation schedules.

How It Works

In this example, Production Equipment is purchased for $50,000 on April 1, 2022, with a useful life of 7 years. Using the half-year convention, depreciation is as follows:

Straight-line Depreciations = Cost of Asset / Useful Life = $50,000 / 7 = $7,142.86

Half-Year Convention: $7,142.86 / 2 = $3,571.43

This also assumes that there’s no scrap of salvage value. Although there are 7 years for the item’s useful life, with the half-year convention, it’s treated as 8 years for the depreciation schedule:

Year 1: $3,571.43

Year 2: $7,142.86

Year 3: $7,142.86

Year 4: $7,142.86

Year 5: $7,142.86

Year 6: $7,142.86

Year 7: $7,142.86

Year 8: $3,571.43

Context for Depreciation Convention

A depreciation convention gives context on how depreciation is performed by the company. It guides the company on available depreciation methods based on the asset’s useful life, how much the asset can be depreciated once it’s removed from service, and how depreciation is accounted/claimed in the initial and final year during the asset’s recovery period.

Depending on the situation and the type of depreciation convention involved, the following are some different conventions and how they vary:

  • Full Month permits a business to get a complete month of depreciation for the month when the asset has been put in service. There’s no depreciation taken for the month of disposal.
  • Next Month permits a business to start recording depreciation for the fixed assets the following month and being able to record one month of depreciation “when disposed of.”
  • Actual Days permits depreciation to be recorded for every single day an asset is in service during its fiscal year.
  • Mid-Quarter permits depreciation for half of the 3-month business period whenever the asset’s been put in place and disposed of (for both quarters).

Conclusion

While this is illustrative of financial reporting requirements, it’s an important consideration for business owners and their accounting professionals. Optimizing fixed asset depreciation leads to more accurate books, which will help in tax planning.